01
Bathroom Brass Water 2 Way Angle Stop Valve
Product description
An angle valve is a commonly used pipeline valve, usually installed in the corner of the pipeline, used to control the pipeline flow, cut off the pipeline circulation regulate the pipeline pressure, and so on. Its structure is characterized by a 90-degree turn, the valve body is angular. In household water pipelines, angle valves are usually placed at the corners of the pipeline for easy repair and maintenance, and can also be used to control water flow or shut off a certain pipe. For example, when installing a shower, an angle valve can be installed at the inlet of the shower for ease of maintenance, and when it is necessary to shut off the water supply to the shower, the angle valve can be closed without affecting the tap water supply to the entire house.
|
Material
|
Brass
|
|
Cartridge
|
Ceramic cartridge
|
|
Cartridge life time
|
No leakage after 500,000 times using
|
|
Surface Finish
|
Chrome plating
|
|
The Thickness Of Nickle Plating
|
3.5-12um
|
|
The Thickness Of Chrome Plating
|
0.1-0.3um
|
|
Water Press for Leakage Test
|
10kgs, no leakage
|
|
Salt Spray Test
|
24 Hours
|
|
Water Flow
|
Basin faucet ≥ 5L/min
|
|
Customized
|
OEM & ODM are welcomed
|
Advantages
1. Long service life
Angle valve is the most basic control equipment for water pipes, so its structure is very simple and easy to maintain. Angle valve material is generally copper, stainless steel, or copper alloy, etc., these materials are excellent in durability and corrosion resistance, long service life, not easy to damage.
2. Convenient operation
Angle valve operation is very simple, one only needs to rotate the handle to realize the switch valve and the operation is very flexible. The angle valve handle is relatively long, making it easier to twist, feel good, and will not slide.
3. Diverse installation methods
Angle valves can be fixed by pressure installation, clamping installation, and other ways, not subject to the limitations of the pipeline, the operation is also more flexible. Angle valve from the side into the water can save the trouble of water pipe rotation but also can reduce the leakage phenomenon.
4. Saving water
Angle valves can reduce the waste situation in showers, hand washing, and other life scenes. When washing hands, just push the angle valve gently, and the water flow will stop, do not have to stay in the hands, can avoid cold water consumption, and also can effectively avoid water stains and pollution.
Installation
1. Choose the right installation location: please ask the professional to carry out the equipment, and choose the outstanding local water to avoid accidental formation of loss.
2. Clean the outlet pipe connection: before equipment, be sure to clean the outlet pipe connection of sand and debris, to prevent the formation of ceramic chip jamming, resulting in water leakage.
3. Tighten the angle valve: equipment, do not grab the angle valve hand wheel rotation fastening, should be wrapped in several layers of cloth or paper towels and other cushioning on the valve body, and then use a wrench to clamp the valve body rotation for fastening. If you do not wrap the buffer directly clamp the valve body, may be scratched angle valve appearance, affecting the beautiful.
4. Check for leaks: after the equipment, should open the main valve into the water, check the angle valve has no leakage, etc., usually into the water pressurized for about 15 minutes to confirm. Not through the water pipe equipment angle valve, should be a closed angle valve.
Precautions
1. Avoid direct fastening by hand: when fastening the angle valve, do not directly grab the handwheel rotation by hand, should be wrapped in the valve body cushion and then fastened with a wrench to prevent scratches on the exterior of the angle valve.
2. Check the water leakage: after the equipment opens the main valve into the water, check the angle valve for leakage, to ensure that there is no water leakage.