How to Install Faucet Universal Hose？

The installation method of stainless steel faucet universal pipe is relatively simple, but you need to pay attention to some details to ensure that the installation is solid and safe to use. The following is a common installation step:

1. Prepare tools and materials
Tools: screwdrivers, wrenches, pliers, cloth (used to pad the surface of the faucet to prevent scratches), and so on.
Materials: new stainless steel faucet universal tube, washer (if there is one in the original accessories), sealing tape (optional, for enhanced sealing).

2. Turn off the water supply
Before installation, be sure to turn off the water source valve to avoid water leakage during installation.

3.  Disassemble the old universal pipe
Unscrew the nut: Use a spanner or screwdriver to unscrew the nut at the connection between the faucet and the old universal pipe. If the surface of the faucet is relatively smooth, you can use a cloth pad under the spanner or screwdriver to prevent scratching the faucet.
Pull out the old tube: after loosening the nut, gently pull out the old stainless steel faucet universal tube. Pay attention to check whether there is a washer left on the faucet, if so, you need to remove it and keep it properly.

4. Install the new universal tube
Prepare the new tube: Make sure the new stainless steel faucet universal tube is intact and check if there is a washer or other sealing material on its connection.
Apply sealing tape (optional): To enhance the sealing, you can apply a thin layer of sealing tape to the connection of the new tube. However, please be careful not to apply too much as this may affect the connection.
Install the new tube: Insert the new stainless steel faucet universal tube into the connection of the faucet, making sure it fits tightly into the faucet.
Tighten the nut: use a spanner or screwdriver to tighten the nut on the connection. Be careful to apply moderate force and not over-tighten or over-loosen. Over-tightening may cause damage to the faucet or universal pipe, while over-loosening may result in water leakage.

5. Inspection and Testing
Check connections: Make sure all connections are tightly fixed and there is no looseness or water leakage.
Open the water source: slowly open the water source valve and check whether the new stainless steel faucet universal tube is leaking. If a leak is found, immediately turn off the water supply and recheck the connections for tightness.
Adjust the water flow: test the rotary function of the universal tube to ensure that it can flexibly adjust the direction and angle of the water flow.

Precautions
During installation, be sure to keep your hands dry to avoid slipping off or damaging the fittings.
In case of installation difficulties or uncertainty, it is recommended to consult professional maintenance personnel or the service hotline of the relevant brand.
After the installation is completed, the connections should be checked regularly for looseness or leakage to ensure safe use.
By following the above steps and precautions, you should be able to successfully install the stainless steel faucet universal pipe and enjoy the convenience it brings.